6 volt ride on battery

PHYSICAL SPECIFICATION
Nominal Voltage Nominal Capacity (20HR)				6V 4Ah
Dimension		Length Width Container Height Total Height		70±1mm （2.76 inches) 47±1mm (1.85 inches) 100±1mm (3.94 inches) 106±1mm (4.17 inches)
Weight				Approx. 0.67Kg ±3% ( 1.48lbs)
Standard Terminal				Fasten Tab No.187E（F1)
						Shimastu NP series AGM VRLA Batteries have been developed as general purpose batteries,they're valve-regulated lead acid batteries with high quality. Absorbed Glass Mat(AGM) separators & high purity raw materials, featured by perfectly good performance and reliable standby service life. Features: 1.Non-spillable 2.Sealed and Maintenance-free Operation 3.High Quality and High Reliability 4.Less gassing,low Self-discharge 5.Low internal resistance 6.Long design life up to 6 years in float service at 25℃ (77 0F )
ELECTRICAL SPECIFICATION
Characteristics						Discharge curves @ 25℃ (77 °F)
Capacity			20 hour rate (0.2A) 10 hour rate (0.375A) 5 hour rate (0.68A) 3 hour rate (1.0A) 1 hour rate (2.2A)		4.0Ah 3.8Ah 3.4Ah 3.0Ah 2.2Ah
Capacity affected by temperature			40℃ （104 0F） 25℃ （77 0F） 0℃ （32 0F）		102% 100% 85%
Max Discharge Current			40A(5 Sec)
Short Circuit Current			210A
Internal Resistance			Full charged battery (25℃,77 0F) 25mΩ
Constant Voltage Charge	Cycle		Initial Charging Current less than 1.2A Voltage 7.20~7.50V at 25℃ (77 0F ) Temperature Coefficient –15mV/℃
	Standby		No limit on Initial Charging Current Voltage 6.75~6.90V at 25℃ (77 0F ) Temperature Coefficient –10mV/℃

Technical Features:

Sealed Construction Shimastu’s unique construction and sealing technique ensures no electrolyte leakage from case or terminals.

Electrolyte Suspension System,Besides 6 volt battery for ride on toys,all other NP series batteries utilize Shimastu’s unique electrolyte suspension system incorporating a microfine glass mat to retain the maximum amount of electrolyte in the cells. Theelectrolyte is retained in the separator material and there is no free electrolyte to escape from the cells. No gels or other contaminants are added.

Control of Gas Generation The design of Shimastu’s NP batteries incorporates the very latest oxygen recombination technology to effectively control the generation of gas during normal use.

Low Maintenance Operation Due to the perfectly sealed construction and the recombination of gasses within the cell, the battery is almost maintenance free.

Terminals NP batteries are manufactured using a range of terminals which vary in size and type. Please refer to details as shown.

Operation in any Orientation The combination of sealed construction and Shimastu’s unique electrolyte suspension system allows operation in any orientation, with no loss of performance or fear of electrolyte leakage. (Excluding continuous use inverted)

Valve Regulated Design The batteries are equipped with a simple, safe low pressure venting system which releases excess gas and automatically reseals should there be a build up of gas within the battery due to severe overcharge. Note. On no account should the battery be charged in a sealed container.

Lead Calcium Grids The heavy duty lead calcium alloy grids provide an extra margin of performance and life in both cyclic and float applications and give unparalleled recovery from deep discharge.

Long Cycle Service Life Depending upon the average depth of discharge, over a thousand discharge/charge cycles can be expected.

Float Service Life The expected service life is five years in float standby applications.

Separators The use of the special separator material provides a very efficient insulation between plates preventing inter-plate short circuits and prohibiting the shedding of active materials.

Long shelf Life The extremely low self discharge rate allows the battery to be stored for extended periods up to one year at normal ambient temperatures with no permanent loss of capacity.

Operating Temperature Range The batteries can be used over a broad temperature range permitting considerable flexibility in system design and location.

* Charge – 15°C to 50°C

* Discharge – 20°C to 60°C

* Storage – 20°C to 50°C (fully chargedbattery)

Why choose us?

• When it comes to high-quality, affordable Hot Sale Batteries, our Chinese factory is the go-to source for discerning customers worldwide.
• With the purpose of always providing better quality and service, we keep a close eye on the market trend and customer's demands, so as to improve our manufacture techniques and service.
• Our Chinese factory is dedicated to producing the highest quality Hot Sale Batteries to meet the demands of our valued customers.
• The company always takes customers as the center and regards customers as close partners to grow together. In our development, we always adhere to the spirit of winning by quality, innovation and development, and strive to serve any customer wholeheartedly, which is often unanimously recognized by customers.
• Our factory specializes in manufacturing high-quality Hot Sale Batteries and providing the best possible customer service at affordable prices.
• All kinds of specifications of our products are complete, long-term stock is sufficient, we can deliver goods at any time, welcome to order.
• Our factory is known for producing top-quality Hot Sale Batteries with superior customer service and support.
• We provide valuable product solutions for our customers, and eventually become a powerful driving force in the industry.
• Our Chinese factory is dedicated to delivering the best quality Hot Sale Batteries and unmatched customer service to meet our clients' needs.
• We are a technology-oriented large-scale 6 volt ride on battery company integrating R&D, operation and service.

Hot Tags: 6 volt ride on battery, China 6 volt ride on battery manufacturers, suppliers, factory, 12v 60ah deep cycle battery, 12v 31ah gel battery, 50 ah gel battery, 140 amp deep cycle battery, swift dzire battery, mini solar inverter with battery